- Adjustable Shelf Settings

*Adjustable Shelves Edging Options

-- Please Select --Edge Shelf Front Side Only - Default Edge Shelf All Round No Edging Required

*Select a Shelf Support Drilling Pattern - Default = Pattern 1

-- Please Select --Pattern 1 - Drill a {QTY} of Holes Per Shelf - Default {QTY} = 5 Holes Pattern 2 - Drill Top to Bottom Less a {Blocked Height} - Default = 250mm None - No Shelf Support Holes

- - - If Using Pattern 1 - Vary the Drilling {QTY} Per Shelf - Default = 5

- - - If Using Pattern 2 - Vary the Top & Bottom {Blocked Height} - Default = 100mm

- Vary the Shelf Hole Diameter - Default = 5mm

-- Please Select --5mm Dia. Hole - Default 8mm Dia. Hole 10mm Dia. Hole 3mm Dia. Hole

- Vary the System Drilling Gap Between Holes - Default=32mm ($$$ Any Variation Incur Additional Charges $$$)

- Vary Shelf Set Back (Actaul Shelf Depth) Enter a Set Back from Front of Carcass - Default=10mm

*- Vary the Front Set of Holes Offset Drilling Position - Default is 40mm from Front of Shelf

*- Vary the Rear Set of Holes Offset Drilling Position - Default is 40mm from Back of Shelf

* Required Fields